UK Race Support Home Page

Aprilia RSV4

Bodywork
Aprilia RSV4 Race Fairing Made in the UK from the highest quality materials available by dedicated and experienced laminators. Bodywork comes in standard white Gel Coat, some coloured Gel Coats are available at extra cost. Please contact us for more details. Made using 200 gm woven cloth on all our interiors for a superior finish and strength. All mounting points are pre-drilled and re-enforced as standard. Kits come complete with 1/4 turn DZUS fasteners where necessary. All kits are built to conform to current A.C.U Regulations for oil containment. £240.00

Aprilia RSV4 Race Seat Unit Made in the UK from the highest quality materials available by dedicated and experienced laminators. Bodywork comes in standard white Gel Coat, some coloured Gel Coats are available at extra cost. Please contact us for more details. Made using 200 gm woven cloth on all our interiors for a superior finish and strength. All mounting points are pre-drilled and re-enforced as standard. Kits come complete with 1/4 turn DZUS fasteners where necessary. All kits are built to conform to current A.C.U Regulations for oil containment. £140.00

Aprilia RSV4 2009/12 Double Bubble MRA Screen RSV4 1000/Factory 09> Manufactured in Germany by the world’s largest aftermarket motorcycle windscreen maker - and original creator of the double-bubble race screen - these are the highest quality screens you can buy.This type of windscreen was developed for GP racing and is used by many including Max Biaggi and Carlos Checa. Shaped like the original at the base, but with an additional 3-5cm bubble in the middle, they take the wind pressure off the rider. - Smoked grey tint (clear and black available to special order) - "Raster" black gradient finish at base of screen to conceal and protect rear of instrument panel from strong sunlight £66.83*

Aprilia RSV4 2009/12 Tech Spec Tank Grips These pads are available in two patterns, snake skin and high fusion. Please note this kit does not include the center tank pad. High Fusion – is a thin (.035") synthetic rubber blend with a simple ruff texture. With High Fusions rubber blend, you will feel a positive grip into your tank, less pressure on your wrists, elbows and shoulders, plus a more solid seat position. High Fusion is an excellent Grip Pad product for all riders and is also excellent for paint and surface area protection. High Fusion uses TechSpec's personal "Releasable/Reusable adhesive". True quality and a one of a kind product! Snake Skin – is a basic, .125" thin "GRIP PAD" with a low profile diamond grip pattern. With Snake Skins .125" thickness and the rubber padding properties, one will not only feel and excellent GRIP into the tank, less pressure on your wrists, elbows and shoulders, but could also notice a reduction in shock and vibration from the bike and road. TechSpec's Snake Skin, grip pads are an excellent product for all riders and uses TechSpec's personal "Releasable/Reusable adhesive". True quality and a one of a kind product! C3 - TechSpec’s “C3” synthetic rubber is a .100” thick Gripster Grip “Pad” offering excellent grip and the ultimate in comfort of the Gripster line. Will also assist in reduction of vibration and increase in comfort. C3 uses TechSpec's personal "Releasable/Reusable adhesive". From £36.49
	Options
Aprilia RSV4 2009/12 Luimoto Seat Cover Luimoto is the authentic designer of motorcycle seat covers. Luimoto design and manufacture all of our seat covers in-house, utilizing computer aided design (CAD) as well as a computer controlled CNC cutter to produce all of our products. This ensures the highest and most consistent quality available for our clients. Seat covers come with full fitting instructions so all you need is a heavy duty stapler or we can fit it for you. Luimoto unmatched design, luxurious synthetic suede, contrast stitching & italian flag embroideries, complete the aggressive look of your Aprilia. Stand out with the finishing touch of Luimoto.. The RSV4 seat comes in two styles: Style 1 - Black Suede, Italian Flag, Silver Hi-lite, Carbon Fiber Effect Black Sides, Red Stitching Style 2 - Black Suede, Italian Flag, Black Hi-lite, Carbon Fiber Effect Black Sides, Black Stitching. From £124.99
	Style
Brakes
Aprilia RSV4 2009/12 Brembo Sintered Front Brake Pads 07BB3093 Brembo Brake Pads Brembo, a world leading name in brakes, expands its catalogue with a full range of high performance pads incorporating vanguard technology designed to improve the safety of the entire braking system. Offering a wide variety of compounds, from sintered to carbon-ceramic, and a big selection of part numbers, Brembo is able to satisfy the specific needs presented by motorcycles of every kind – racing, road, off road street and scooter – not to mention the expectations of their riders. Make no mistake, this is not just another aftermarket pad but a World class product fitted as original equipment to thousands of motorcycles! £70.98 Per Side

Aprilia RSV4 2009/12 Brembo Ceramic Front Brake Pads 07BB30RC RC - The Road Race Pad The RC (front) pad is a carbon ceramic pad designed specifically for road racing. It has a very high and stable friction coefficient, particularly at the extremely high temperatures generated in racing. However, this carbon ceramic pad has slightly softer initial bite and a more progressive feel than it's sintered equivalent. It is specifically designed to operate at high temperatures but is not so good at low temperatures so it is not suitable for road use and should not be used on rear discs! £65.18 Per Side

Aprilia RSV4 2009/12 Brembo Rear Brake Pads 07BB2035 Brembo Brake Pads Brembo, a world leading name in brakes, expands its catalogue with a full range of high performance pads incorporating vanguard technology designed to improve the safety of the entire braking system. Offering a wide variety of compounds, from sintered to carbon-ceramic, and a big selection of part numbers, Brembo is able to satisfy the specific needs presented by motorcycles of every kind – racing, road, off road street and scooter – not to mention the expectations of their riders. Make no mistake, this is not just another aftermarket pad but a World class product fitted as original equipment to thousands of motorcycles! £20.77

Chain and Sprockets
Aprilia RSV4 2009/12 AFRAM Chain & Sprocket Kits Kit Selection For chains and chain & sprocket kits we list several grades. Why? What’s the difference? In a word QUALITY. We only list chains that are appropriate for that particular model. However, the higher the grade and ultimately the price, the better the chain. This means it is stronger, will last longer, is appropriate for harder use and in the long term will save you money. We list three grades. Chain & sprockets quality guide: Economy– is the basic chain grade required for this model. It is best suited to light and general use and is the Minimum acceptable quality for the model. Recommended – is a higher grade and is the most appropriate for the model taking all aspects of use into account. This is the reason why we produce this recommended kit High Performance (Race) – is Super Strong for the model and is suitable for more extreme use including Track Days and Racing (where specified). From £133.67
	Options
Aprilia RSV4 2009/12 AFRAM Chain Kit Selection For chains and chain & sprocket kits we list several grades. Why? What’s the difference? In a word QUALITY. We only list chains that are appropriate for that particular model. However, the higher the grade and ultimately the price, the better the chain. This means it is stronger, will last longer, is appropriate for harder use and in the long term will save you money. We list three grades. Chain & sprockets quality guide: Economy– is the basic chain grade required for this model. It is best suited to light and general use and is the Minimum acceptable quality for the model. Recommended – is a higher grade and is the most appropriate for the model taking all aspects of use into account. This is the reason why we produce this recommended kit High Performance – is Super Strong for the model and is suitable for more extreme use including Track Days and Racing (where specified). From £88.80
	Options
Aprilia RSV4 AFRAM Front Sprockets Like many components there's more to a sprocket than you might think! AFAM have been making sprockets for more than 25 years and during that time, they have refined their manufacturing techniques to such a level that their standards now exceed those of the OEM's. Through computer programs, sprocket designs can be stress tested prior to undergoing tough field tests. The sprockets are made on precision controlled equipment. The teeth are machined to the latest standards, this ensures the maximum chain life and more efficient power transmission. Machining is carried out on a gear hobbing machine. The teeth and the outside diameter are cut at the same time. This makes sure that the teeth are concentric to the sprocket centre. Most OEM's demand a maximum run-out of 0.5mm, all AFAM sprockets have a maximum run-out of 0.2mm - more than twice as accurate as the industry standard! £21.41
	Options
Aprilia RSV4 2009/12 AFRAM Hard Anodised Alloy Rear Sprockets All aluminium sprockets are made from heat treated 7075-T6 aluminium. After precision machining and flattening they are hard anodised for durability and corrosion resistance. Light weight aluminium rear and lightened steel front race sprockets have been used by many of the worlds best riders including Valentino Rossi, Max Biaggi, Loris Capirossi, James Toseland, Chris Vermulen, Carlos Checa, Troy Bayliss, Carl Fogarty, Michael Doohan, Alex Criville, Ruben Xaus, Fabien Foret, Jeremy McGrath, Stefan Everts and many many more! From £36.12
	Options
Crash Protection
Aprilia RSV4 2009 /12 Evotech Crash Protector Bobbins / Sliders Using the bike's original mounting points, they are easy to fit and you won't have to modify your bike in any way. We have used our knowledge and experience to develop innovative mountings that place the bobbins exactly where they should be - through the holes that are already in your fairing, or around it. We do not ask you to risk drilling holes in your expensive fairing. The kit includes two bobbins, mounts, all necessary fixings and fitting instructions. £117.43

Aprilia RSV4 2009/12 Front Fork Spindle Protector Bobbins Evotech’s Aprilia spindle bobbins are incredibly easy to fit and are retained by stainless steel spindles and stainless nyloc nuts, for added security. These spindle bobbins are imbued with the strength of ten tigers. Made in England from high performance engineering polymer and aluminium, protect your expensive fork bottoms and brake callipers in the event of a spill. The Aprilia spindle bobbin kit compromises two bobbins, spindle, nuts, washers, and fitting instructions. Evotech supplies individual components should you need replacements at any time. It’s a fact of motorcycling life that your machine will incur costly bumps and scrapes every so often. That’s why Evotech has designed the very best spindle bobbins to give your Aprilia the ultimate protection without blemishing its good looks. £33.70

Aprilia RSV4 2009/12 Rear Fork Spindle Protector Bobbins Evotech’s Aprilia spindle bobbins are incredibly easy to fit and are retained by stainless steel spindles and stainless nyloc nuts, for added security. These spindle bobbins are imbued with the strength of ten tigers. Made in England from high performance engineering polymer and aluminium, protect your expensive fork bottoms and brake callipers in the event of a spill. The Aprilia spindle bobbin kit compromises two bobbins, spindle, nuts, washers, and fitting instructions. Evotech supplies individual components should you need replacements at any time. It’s a fact of motorcycling life that your machine will incur costly bumps and scrapes every so often. That’s why Evotech has designed the very best spindle bobbins to give your Aprilia the ultimate protection without blemishing its good looks. £33.70

Aprilia RSV4 2009/11 GB Racing Protection Kit Box Set consists of: Alternator / Generator Cover. Gearbox / Clutch Cover. Paddock Stands / Bobbins Left and Right. Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Easy Installation - Bolt on products, allowing fast and easy removal and/or replacement of ALL PRODUCTS Safe and Secure - Every single product is meticulously tested before it is manufactured, ensuring a high standard to every product £149.50

Aprilia RSV4 2009/12 GB Racing Engine Cover Set Box Set consists of: Alternator / Generator Cover. Gearbox / Clutch Cover. Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon Easy Installation - Bolt on products, allowing fast and easy removal and/or replacement of ALL PRODUCTS Safe and Secure - Every single product is meticulously tested before it is manufactured, ensuring a high standard to every product £132.68

Chassis Parts
Aprilia RSV4 2009/12 Attack Performance Rearsets Attack Performance Controls are manufactured in Southern California from 7075 T6 aerospace grade aluminum alloy. Unlike low-budget 6061 - used by other manufacturers - this material is rated at a tensile strength of 76,000 KSI (as opposed to only 42,000 KSI with 6061 grade material), making Attack Rearsets more than 50% stronger than other brands. Utilising superior material with better weight-to-strength ratio enables innovative design to produce lighter, thinner foot controls without sacrificing strength or durability. A very wide range of adjustability accommodates any boot size, and permits the ultimate sweet spot for any rider to be dialed in quickly. Survivability - built into each model after extensive and rigorous on-track R&D - gives Attack Foot Controls the edge over the competition. Partial "breakaway" pegs are designed, in case of hard touchdown, to leave enough of the peg intact for the rider to finish the race. Quick-change pegs eliminate the need to remove the entire rearset in order to replace, with easily accessible peg release screws. Tightly sprung retracting shift and brake pedals virtually eliminate broken levers. £456.10
	Options
Aprilia RSV4 2009/2011 Pazzo Levers Using the bike's original mounting points, they are easy to fit and you won't have to modify your bike in any way. We have used our knowledge and experience to develop innovative mountings that place the bobbins exactly where they should be - through the holes that are already in your fairing, or around it. We do not ask you to risk drilling holes in your expensive fairing. The kit includes two bobbins, mounts, all necessary fixings and fitting instructions. Pazzo Racing Brake & Clutch Levers Key Features: - Adjustable on the move - Great range of adjustment plus 'dog-leg' design for greater comfort - Easy, direct replacement to standard levers - Proven on the race track - Available in variety of colours - Available as Standard length or 'Shorty' (2 to 3 finger lever 1 ¼ inches shorter than standard) - Shorty lever is much less likely to get damaged in a crash £149.99 Please state colour option and length when ordering
	Type
Aprilia RSV4 2009/11 Bonamici Rearsets New to the UK, made in Italy. These rearsets are probably the best quality and value rearset now on the market. CNC machined, pegs provide excellent grip with a rounded end to the peg. The rearsets have bearings for smooth operation. Race or Road Shift Pattern. We Primarily Stock full black rearsets and any other colours will cost an extra £15 each. For special orders please contact us. £325.00

Aprilia RSV4 2009/11 Carbon Fuel Cap These Quick Action Fuel Caps really are quality and come straight from the MotoGP paddock CNC machined from Aluminum billet Perfectly interchangeable with the original one Supplied complete with fixing screw kit and rubber packing CNC machined from Aluminum billet or Aluminum and Carbon Fibre. Caps come in the following options: Carbon Fibre outer ring with Aluminum Quick Release Cap All Aluminum with Quick Release Cap Colour options of Aluminum Parts: Black, Silver, Titanium & Gold £74.00 All Aluminum Quick Action £95.00 Carbon/Aluminum Quick Action
	Options
Aprilia RSV4 2009/11 EP Tail Tidy Fender Eliminator Super sleek and super strong design which fully integrates with the sporting lines of your Aprilia RSV4. CNC machined from lightweight aircraft grade Aluminium and finished in tough satin black powder coat. The original rear indicators are re-used and supplied with a discreet LED rear number plate light. Designed to fit to your motorcycle's existing mountings with no bodywork modification required. All fixings and instructions are included. £86.80

Engine Parts
Aprilia RSV4 H2O Performance Oversize Racing Radiator The more horsepower an engine creates the more heat it creates. Once an engine reaches around 85°C (185°F) you start loosing power and at about 118°C (244,4°F) you could loose 6-7 HP and ultimately risks the threat of serious damage. Cooling problems are a major cause of failures in all types of racing: the radiator is important to the performance and longevity of your racing engine. This H2O Performance radiator replaces the stock radiator. Can decrease in the water temperature by aproximately 18°C or more, compared to OEM radiators. Supplied with all silicone hoses and fittings. Note: This radiator is designed for racing use and may not fit with standard exhaust headers. £2194.99

Aprilia RSV4 2009/11 Scorpion RP-1 GP Slip-On Can Scorpion have been quietly winning motorsport championships for over 20 years, consistently beating teams which are very publicly supported by rival exhaust manufacturers who construct entire marketing campaigns around their racing involvement. Titanium/Carbon Fibre construction gives 'bolt-on' performance with huge power gains and weight savings over O.E. Designed for racing but is road legal for most applications. £499.00
	Options
Aprilia RSV4 2009/11 Scorpion Factory Slip-On Can Scorpion have been quietly winning motorsport championships for over 20 years, consistently beating teams which are very publicly supported by rival exhaust manufacturers who construct entire marketing campaigns around their racing involvement. All the performance benefits of a Scorpion upgrade but with an O.E. 'plus' look; the overall effect faithful to the replaced O.E. product but with added understated style. £249.00 Stainless Steel Oval £329.00 Carbon Oval £349.00 Titanium Oval Add a carbon tip for £70
	Options Tip
Aprilia RSV4 2009/11 MWR HE Racing Filter MWR Racing Filters, Breath life into YOUR bike. MWR Filters are made specifically from a specially chosen and tested single layer fire resistant foam. Unlike other foam filters, MWR filters are entirely from this special FR Foam. All other filters are duel or triple layered that are laminated and glued together which reduced air flow MWR are not. In the picture is the High Efficient Aprilia RSV4 MWR air filter. It provides a very high air throughput. The wide foam material offers a barely measurable air resistance! The surface is as large as possible. The filters are impregnated with MWR special oil, so that even the smallest dust particles adhere.The oil and filter materials are naturally non-flammable! We recommend to clean the filters every 5000 Km. The metal cover distributes the incoming air across all 4 intake channels. Caution: With modification of exhaust or air supply the mapping of the ECU or the Power Commander must be changed. £96.99

Aprilia RSV4 2009/11 Bazzaz Engine Management System When it comes to engine management in motorcycle racing, the name Bazzaz is synonymous with performance. Bazzaz offer a wide range of products to suite every application, from basic engine management to self mapping with traction control and quick shifter. The Bazzaz Z-Fi & ZFi-TC Fuel Control Unit controls all fuel injectors, which is a significant advantage over the competition. It is a plug and play unit that piggy-backs onto the stock ECU. Each unit comes with an application specific harness that utilizes OEM connectors for simple installation, and comes pre-programmed for either the stock exhaust or a slip-on (or custom installed map). Z-Fi (Fuel Control) - £290.00, Z-Fi QS (Fuel Control & Quick Shifter) - £540.00 Z-Fi TC (Fuel Control, Quick Shifter & Traction Control) - £715.00 Z-AFM Self Mapping (add-on for above) - £260.00 Map Selection Switch - £60.00 TC & Map Selection Switch - £115.00 For more information about the Bazzaz range of products click here (opens new page)
	Options
Aprilia RSV4 2009/11 SPS Lithium Ion Race Battery (Replaces YT12A-BS) More than 65% weight saving of normal lead acid type batteries, makes Lithium Ion batteries perfect for track and race bikes where weight reduction is an enhancement. Unique casing design with spacers for exact height adjustment, cases are same size as the original battery that is being replaced. Less Volume and weight - 1/3 of equivalent model normal lead acid battery No pollution - contains no acid or heavy metals such as lead, cadmium or mercury Non spilling - contains no acid Super cranking power - greater cranking power (40CA+) Increased Safety - non polluting, non explosive and non combustible Excellent cycle life - 2000+ charging cycles. £139.99

Aprilia RSV4 2009/11 EP Radiator Guard Evotech’s radiator protector guards attach to your bike modification-free. The elegantly designed matrix is pierced with hexagonal holes to optimise airflow whilst providing maximum protection from road debris. The Aprilia RSV4 radiator protector guards boast remarkable strength to weight ratio, typically weighing between 250 and 400 grammes. As only the best will do for your Aprilia RSV4, the guard is CNC machined from aircraft quality aluminium. Finished in durable black powder coating, the Aprilia RSV4 oil cooler guard kit includes fixings and easy to follow instructions. £71.48